MUNTERSMUNTERS
Munters is presented as a worldwide leader in climate control for mission-critical processes, focused on temperature and humidity control in demanding industries.
Its solutions aim to lower customers' climate and environmental impact through efficient resource use, supporting better climate outcomes, higher efficiency, and lower carbon emissions.
Sustainability is described as a core part of the company's business strategy and value creation.
GLASdek GX30 Single-coated evaporative cooling and humidification media
GLASdek GX30 combines high strength and durability with strong cooling and humidification rates. It is made from a flame-retardant material reinforced with rigidifying agents and suits projects with strict fire code requirements.
The media carries UL900 and ULC-S111 Class 1 fire ratings and holds GREENGUARD Gold certification for low chemical emissions.
GLASdek GX40 Ceramic-coated evaporative cooling and humidification media
GLASdek GX40 is a high-performance evaporative medium designed for strong cooling and humidification, low pressure drop, and long service life.
It is made from inorganic, non-combustible material with a double ceramic coating. It can typically run on tap water with little or no water treatment and does not need a silver ionization filter.
It is supplied in cassettes built for the FA6 frame system, which comes in standard sizes that fit typical air handling units.
CELdek Evaporative Cooling Pad
The pad offers strong cooling efficiency thanks to its design, manufacturing methods, and materials.
High face velocity lets air pass through without carrying water droplets, and low pressure drop keeps resistance minimal at high speeds.
Its steep, unequal flute design is self-cleaning, flushing dirt and debris from the surface.
Routine maintenance can usually be done while the system is running.
CELdek 7090-15 evaporative cooling pad
This CELdek Series pad targets high-efficiency cooling and suits livestock buildings and greenhouses that need higher air velocity.
Made from impregnated, corrugated cellulose sheets with varied flute angles, it achieves high evaporation efficiency at very low pressure drop. Scaling stays low and water carry-over is avoided because water is directed to the air inlet side.
CELdek 7060-15 evaporative cooling pad
This CELdek Series pad targets high-efficiency cooling and suits livestock buildings and greenhouses that need higher air velocity.
Made from impregnated, corrugated cellulose sheets with varied flute angles, it achieves high evaporation efficiency at very low pressure drop. Scaling stays low and water carry-over is avoided because water is directed to the air inlet side.
WDP Water Distribution System
WDP is a complete water supply and drainage system for wetting evaporative cooling pad walls. It includes a gutter system, water tank, pump, supply and drainage kit, wall stabilisation parts, and end kits.
It is designed for even wetting of CELdek pads, continuous water recirculation, and mechanical stability of the pad wall. Its modular layout allows walls of various lengths, typically multiples of the 600 mm standard pad width.
Pressurised water enters at the top through a header with small upward-facing calibrated holes that resist clogging and keep distribution even, even when pads are not perfectly level.
WETdek
The WETdek evaporative cooling system uses natural evaporation together with Munters features for precise temperature and humidity control.
- Corrosion-resistant, high-quality construction with few mechanical parts for reliable operation
- Custom airflow volumes from roughly 20,000 to over 100,000 scfm, with multiple units stackable or combinable for larger flows
- Cooling efficiency up to 99% using media depths of 4 to 24 inches
- Low system pressure drop
- Can be programmed for automatic maintenance during operation
- GLASdek and CELdek media for extended, reliable media life
FA6 Evaporative humidifier and cooler
FA6 units are designed to provide strong evaporative cooling and humidification across many industrial uses.
They use GLASdek GX40 ceramic-coated, fire-resistant media housed in reinforced steel, making the unit robust and easy to install.
The FA6 offers high performance and low operating cost in many sizes for residential and industrial air handling systems.
TURBOdek Evaporative Media
TURBOdek is a high-efficiency, low pressure drop, low drift medium that maximises cooling to improve combustion turbine output. Reported turbine capacity gains during peak summer demand reach as high as 20%, with about 5% better cooling efficiency than standard CELdek media.
It uses a patented unequal angle, unequal flute design for high-velocity cooling up to 750 fpm. Its treated heavy cellulose and algae- and weather-resistant edge coating extend media life and simplify cleaning.
EXTRUdek 150
EXTRUdek is a durable water distribution system for mounting 150 mm thick CELdek pads and supplying them with water, forming a complete evaporative cooling solution for ventilation systems.
Its structural parts are extruded aluminium or plastic to resist the corrosion that causes leaks and short service life in conventional gutters.
Top and bottom aluminium gutters hold the pads and distribute water, and a perforated self-cleaning pipe in the top gutter spreads water evenly to prevent dry streaks.
EPCC Evaporative Precoolers Condenser
EPCC units are evaporative precoolers for chillers and condensers, typically recirculating water systems with automatic makeup water, a submersible pump, manual or optional automatic bleed-off, and a dump valve.
Air passes through wetted CELdek media and is cooled before reaching the condenser coil. This increases capacity of existing systems or allows smaller condensers, lowering operating and installation costs and extending compressor and fan life.
EPCC works best in hot, dry conditions and also keeps dust off condenser fins year-round. It can be fitted to new or existing units to reduce electricity use, boost capacity, and improve environmental performance.