Shalimar ValvesIndia
Shalimar Valves
Shalimar, founded in 1977, is one of the pioneers of the Indian valve industry. It makes carbon steel valves, stainless steel valves, strainers and special valves, and holds dual ISO 9001, API 6D, API-Q1, API 600 and CE Marking accreditations.
WEDGE GATE VALVES (GTV 101 Series)
- Design Standards: API 600 / API 6D / API 603 / BS 1414
- Face to Face: ASME B 16.10 / API 6D
- Flanges: ASME B 16.5 / MSS SP 44 / ASME B 16.47
- Butt Welding: ASME B 16.25
- Testing: API 598 / API 6D
- Material Options: Carbon Steel, Alloy Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials on request
- Trims: Various combinations available based on service requirements
- Operators: Handwheel, Gear, Chain Wheel Pulley, Electrical Motor, Pneumatic Actuator
- Note: Oval Flat Body Bonnet Joint for 150 lbs
- Note: Male-Female Body Bonnet Joint for ratings ≥ 300 lbs
- Note: RTJ Body Bonnet Joint for ratings ≥ 1500 lbs (standard)
- Note: RTJ Joints available upon request
- Optional Accessories: Electrical & Geared Drive, Bypass Arrangement, Floor Stand
PARALLEL SLIDE GATE VALVES (PGT 101 Series)
- Design Standards: ASME B 16.34-2004 / API 6D / DIN
- Face to Face: ASME B 16.10 / DIN
- Flanges: ASME B 16.5 / MSS SP 44 / ASME B 16.47 / EN 10213
- Butt Welding: ASME B 16.25
- Testing: API 598
- Material Options: Carbon Steel, Alloy Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials based on customer requirements
- Trims: Multiple trim combinations available
- Operators: Handwheel, Gear, Chain Wheel Pulley, Electrical Motor Actuator
- Note: Oval Flat Body-Bonnet Joint for 150 lbs
- Note: Male-Female Body-Bonnet Joint for ratings ≥ 300 lbs
- Note: RTJ Joints available upon request
- Note: RTJ Body-Bonnet Joints for ratings ≥ 1500 lbs (standard)
- Optional Accessories: Electrical & Geared Drive, Bypass Arrangement, Floor Stand, Double Disc Gate, Cone Guided Slab Gate
THROUGH CONDUIT GATE VALVES (CGT 101 Series)
- Design Standards: API 6D / ASME B16.34
- Face to Face: ASME B 16.10 / API 6D
- Flanges: ASME B 16.5 / MSS SP 44 / ASME B 16.47
- Butt Welding: ASME B 16.25
- Testing: API 598 / API 6D
- Material Options: Carbon Steel, Alloy Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials on request
- Trims: Multiple trim combinations available
- Operators: Handwheel, Gear, Chain Wheel Pulley, Electrical Motor Actuator
- Note: Oval Flat Body-Bonnet Joint for 150 lbs
- Note: Male-Female Body-Bonnet Joint for ratings ≥ 300 lbs
- Note: RTJ Joints available upon request
- Note: RTJ Body-Bonnet Joint for ratings ≥ 1500 lbs (standard)
- Optional Accessories: Electrical & Geared Drive, Bypass Arrangement, Floor Stand, Expandable Slab Design
GLOBE VALVES (GBV 102 Series)
- Design Standards: BS 1873 / ISO 15761
- Face to Face: ASME B 16.10
- Flanges: ASME B 16.5
- Butt Welding: ASME B 16.25
- Testing: API 598 / EN 12266 (Part 1 & 2)
- Material Options: Carbon Steel, Alloy Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials on request
- Trims: Multiple trim combinations available
- Operators: Handwheel, Gear, Electrical Motor, Pneumatic Actuator
- Note: RTJ Joints available on request
- Note: RTJ Body-Bonnet Joints for ratings ≥ 1500 lbs (standard)
- Optional Accessories: Electrical & Geared Drive, Bypass Arrangement, Floor Stand
ANGLE GLOBE VALVES (AGV 102 Series)
- Design Standards: BS 1873 / ISO 15761
- Face to Face: ASME B 16.10
- Flanges: ASME B 16.5
- Butt Welding: ASME B 16.25
- Testing: API 598 / EN 12266 (Part 1 & 2)
- Material Options: Carbon Steel, Alloy Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and any other special material on request
- Trims: Various combinations available
- Operators: Handwheel, Gear, Electrical Motor, Pneumatic Actuator
- Note: RTJ Joints available on request
- Note: RTJ Body-Bonnet Joints for ratings ≥ 1500 lbs (standard)
- Optional Accessories: Electrical & Geared Drive
SWING CHECK VALVE (CHV 108 Series)
- Design Standards: BS 1868 / API 6D / ISO 15761
- Face to Face: ASME B 16.10
- Flanges: ASME B 16.5
- Butt Welding: ASME B 16.25
- Testing: API 598 / EN 12266 (Part 1 & 2) / API 6D
- Material Options: Carbon Steel, Alloy Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials on request
- Trims: Multiple combinations available
- Note: Bolted cover
- Note: Male-Female Body Bonnet Joint for ratings ≤ 900 lbs
- Note: RTJ Joints available on request
- Note: RTJ Body-Bonnet Joints for ratings ≥ 1500 lbs (standard)
- Optional Accessories: Bypass arrangement, Dashpot / Hydraulic Non-Slam Arrangement
PISTON CHECK VALVE (CHV 107 Series)
- Design Standards: BS 1868 / ISO 15761
- Face to Face: ASME B 16.10
- Flanges: ASME B 16.5
- Butt Welding: ASME B 16.25
- Testing: API 598 / EN 12266 (Part 1 & 2)
- Material Options: Carbon Steel, Alloy Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials on request
- Trims: Various combinations available
- Note: Bolted cover
- Note: Male-Female Body-Bonnet Joint for ratings ≤ 900 lbs
- Note: RTJ Joints available on request
- Note: RTJ Body-Bonnet Joints for ratings ≥ 1500 lbs (standard)
- Optional Accessories: Bypass Arrangement, Non-Slam Arrangement
SINGLE PLATE CHECK VALVE – SOFT SEATED (CHV 405 Series)
- Design Standards: API 6D / ASME B 16.34
- Face to Face: API 6D
- Testing: API 6D / API 598
- Material Options: Carbon Steel, Alloy Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials as required
- Trims: Various combinations available
- Note: Soft Seated
- Note: Soft seat for tight shut-off
- Note: Lesser weight
- Note: Smaller size and requires lesser force to open
DUAL PLATE CHECK VALVE - METAL SEATED (CHV 406 Series)
- Design Standards: API 6D / API 594 / ASME B 16.34
- Face to Face: API 6D / API 594
- Testing: API 6D / API 598
- Material Options: Carbon Steel, Alloy Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials on request
- Trims: Various combinations available
- Note: Lesser weight
- Note: Smaller size
- Note: Requires lesser force to open
- Optional: Replacement of conventional check valves without pipeline modification
- Optional: Retainerless Design
FLOATING BALL VALVES (BLV 105 Series)
- Design Standards: API 608 / BS 5351
- Face to Face: ASME B 16.10 / API 6D
- Flanges: ASME B 16.5
- Testing: API 598 / EN 12266 (Part 1 & 2) / API 6D
- Material Options: Carbon Steel, Alloy Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials on request
- Trims: Various combinations available
- Note: Fire safe design
- Note: Two-piece design
- Note: Full bore and Reduced bore construction
- Note: Bolted / Screwed gland
- Note: Actuator mounting flange (ISO 5211)
- Note: Antistatic feature
- Note: Anti blow-out stem
- Note: Solid ball construction
- Optional: Single Acting / Double Acting Air Actuator
- Optional: Quarter Turn Motor Actuator
- Optional: Gear Drive
- Optional: Position Indicator
- Optional: Limit Switch
- Optional: Extended Bonnet
- Optional: Extended Stem
TRUNNION MOUNTED BALL VALVES (TLV 105 Series)
- Design Standards: API 6D / API 608 / BS 5351
- Face to Face: ASME B 16.10
- Flanges: ASME B 16.5
- Butt Welding: ASME B 16.25
- Testing: API 598 / BS 6755 Part I / API 6D
- Material Options: Carbon Steel, Alloy Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials on request
- Trims: Various combinations available
- Note: Fire safe design
- Note: Two-piece design
- Note: Full bore and Reduced bore construction
- Note: Bolted gland
- Note: Actuator mounting flange (ISO 5211)
- Note: Antistatic feature
- Note: Anti blow-out stem
- Note: Solid ball construction
- Optional: Single Acting / Double Acting Air Actuator
- Optional: Quarter Turn Motor Actuator
- Optional: Gear Drive
- Optional: Position Indicator
- Optional: Limit Switch
- Optional: Extended Bonnet
- Optional: Extended Stem
ONE PIECE BALL VALVES (BLV 109 Series)
- Design Standards: API 608 / BS 5351
- Face to Face: ASME B 16.10
- Flanges: ASME B 16.5
- Butt Welding: ASME B 16.25
- Testing: API 598 / EN 12266 (Part 1 & 2) / API 6D
- Material Options: Carbon Steel, Alloy Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials on request
- Trims: Various combinations available
- Note: Fire safe design
- Note: Reduced bore construction
- Note: Bolted / Screwed gland
- Note: Actuator mounting flange (ISO 5211)
- Note: Antistatic feature
- Note: Anti blow-out stem
- Note: Solid ball construction
- Optional: Single Acting / Double Acting Air Actuator
- Optional: Quarter Turn Motor Actuator
- Optional: Gear Drive
- Optional: Position Indicator
- Optional: Limit Switch
- Optional: Extended Bonnet
- Optional: Extended Stem
THREE PIECE BALL VALVES (BLV 111 Series)
- Design Standards: BS 5351
- Face to Face: Manufacturer's Standard
- Testing: EN 12266 (Part 1 & 2)
- Material Options: Carbon Steel, Alloy Steel, Stainless Steel, and other special materials as required
- Trims: Multiple combinations available
- Operator: Hand Wheel, Gear, Electrical Actuator
- Note: Fire safe design
- Note: Three-piece construction
- Note: Full bore and Reduced bore construction
- Note: Bolted / Screwed gland
- Note: ISO 5211 Actuator mounting flange
- Note: Antistatic feature
- Note: Anti blow-out stem
- Note: Solid ball
- Optional: Single Acting / Double Acting Air Actuator
- Optional: Quarter Turn Motor Actuator
PRESSURE SEAL WEDGE & PARALLEL SLIDE GATE VALVES (PSV 101 & GSV 101 Series)
- Design Standards: API 600 / ASME B 16.34
- Face to Face: ASME B 16.10
- Flanges: ASME B 16.5
- Butt Welding: ASME B 16.25
- Testing: API 598 / EN 12266 (Part 1 & 2)
- Material Options: Carbon Steel, Alloy Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials on request
- Trims: Various combinations available
- Operator: Hand Wheel, Gear, Electrical Actuator
- Note: OS & Y Design
- Note: SS inlay on sealing zone for carbon steel valves
- Optional: Electrical & Geared Drive, Bypass Arrangement
PRESSURE SEAL GLOBE VALVES (PSV 102 Series)
- Design Standards: BS 1873 / ASME B 16.34
- Face to Face: ASME B 16.10
- Flanges: ASME B 16.5
- Butt Welding: ASME B 16.25
- Testing: API 598 / EN 12266 (Part 1 & 2)
- Material Options: Carbon Steel, Alloy Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials on request
- Trims: Various combinations available
- Operator: Hand Wheel, Gear, Electrical Actuator
- Note: OS & Y Type
- Note: SS inlay on sealing zone for carbon steel valves
- Optional: Electrical & Geared Drive, Bypass Arrangement
PRESSURE SEAL CHECK VALVES (PSV 108 Series)
- Design Standards: BS 1868 / API 6D / ASME B 16.34
- Face to Face: ASME B 16.10
- Flanges: ASME B 16.5
- Butt Welding: ASME B 16.25
- Testing: API 598 / EN 12266 (Part 1 & 2)
- Material Options: Carbon Steel, Alloy Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, and other special materials on request
- Trims: Various combinations available
- Operator: Hand Wheel, Gear, Electrical Actuator
- Note: OS & Y Design
- Note: SS inlay on the sealing zone for carbon steel valves
- Optional: Electrical & Geared Drive, Bypass Arrangement
Gate Valves (GTV 103 Series) / Globe Valves (GBV 104 Series)
- Design Standards: API 602 / BS 5352 / ISO 15761
- Testing: API 598 / EN 12266 (Part 1 & 2)
- End Connections: ASME B 16.11 / ASME B 1.20.1
- Material Options: Carbon Steel, Alloy Steel, Stainless Steel, and other special materials as required
- Trims: Multiple combinations available
- Operator: Hand Wheel, Gear, Electrical Actuator
- Note: OS & Y Type
- Note: Bolted Bonnet or Welded Bonnet
- Note: Full bore or Reduced bore options
- Note: Molded pre-compressed graphite ring packing
- Optional: Alternate Stainless Steel Investment Cast Valves
- Optional: Welded-on / Integral Flanged Ends
- Optional: Seal-Welded Bonnet
- Optional: Extended Bonnet
- Optional: Bellow-Sealed Bonnet
Cast Globe Valves (BSV 102 Series)
- Design Standards: BS 1873 / BS 5352 / API 602
- Face to Face: ASME B 16.10
- Flanges: ASME B 16.5
- Butt Welding: ASME B 16.25
- Screwed End: ASME B 1.20.1
- Socket End: ASME B 16.11
- Testing: EN 12266 (Part 1 & 2) / API 598
- Material Options: Carbon Steel, Alloy Steel, Stainless Steel, and other special materials based on requirement
- Trims: Multiple combinations available
- Operator: Hand Wheel, Gear
- Note: OS & Y Type
- Note: Bolted or Sealed Bonnet
- Note: Full Bore or Reduced Bore
- Note: Long life cycle (10,000 cycles) tested bellows
- Note: Back seat & gland seal arrangement
- Note: Guided plug & stem with non-torsion bellows
- Note: Body testing as per bellow pressure–temperature rating
- Optional: Leak detecting arrangement
Y - TYPE GLOBE VALVES (SPLIT & MONO BODY) (YGV 301 & YGV 302 Series)
- Design Standards: BS 5160 / BS 1873 / ASME B 16.34
- Flanges: ASME B 16.5 / DIN 2500 Series / EN 10213
- Testing: EN 12266 (Part 1)
- Material Options: Available in various grades depending on application
- Trims: Multiple combinations available
- Optional: Gear Drive
- Optional: Split Body (Reduced Bore)
- Optional: Mono Body (Full Bore)
TANK BOTTOM VALVES (FBV 120 & FBV 121 Series)
- Design Standards: Manufacturer's Standard / ASME B 16.34
- Flanges: ASME B 16.5 (Outlet); DIN 2500 Series & Manufacturer's Standard (Inlet)
- Testing: EN 12266 (Part 1)
- Material Options: Various material grades available as per application
- Trims: Multiple combinations available
- Optional: Gear Drive
- Optional: Flush Bottom (Open to Tank / Valve) (FBV118 / FBV119)
ANGLE VALVES (AGV 303 Series) / BAYONET VALVES (AFV 123 Series)
- Design Standards: BS 5160 / BS 1873 / ASME B 16.34
- Flanges: ASME B 16.5 / DIN 2500 Series / EN 10213
- Testing: EN 12266 (Part 1)
- Material Options: Available in multiple ASTM grades based on application
- Trims: Varieties of combinations available
- Operator Options: Handwheel, Gear, Chain Wheel Pulley, Electrical Motor, Pneumatic Actuator
- Note: Bolted cover
- Note: Screwed cover for 15 & 20 mm sizes
- Note: Large straining screen with lowest pressure drop
- Optional: Gear Drive
- Optional: Angle Check Valve (ACV 123)
- Optional: 3-Way Angle Valve (ATV 303)
Y-TYPE STRAINER (STR 304 Series)
- Design Standards: Manufacturer's Standard
- Flanges: ASME B 16.5
- Testing: API 598
- Material Options: Carbon Steel, Alloy Steel, Stainless Steel, and other special materials based on application
- Trims: Varieties of combinations available
- Operator Options: Handwheel, Gear, Chain Wheel Pulley, Electrical Motor, Pneumatic Actuator
- Note: Bolted cover
- Note: Screwed cover for 15 & 20 mm sizes
- Note: Large straining screen with lowest pressure drop
- Optional: Quick Opening Arrangement
- Optional: Differential Pressure Gauges
BUCKET TYPE STRAINER (STR 305 Series)
- Design Standards: Manufacturer's Standard
- Flanges: ASME B 16.5
- Testing: API 598
- Material Options: Carbon Steel, Alloy Steel, Stainless Steel, and other special materials based on requirements
- Trims: Various combinations available
- Operator Options: Handwheel, Gear, Chain Wheel Pulley, Electrical Motor, Pneumatic Actuator
- Note: Bolted cover
- Note: Screwed cover for 15 & 20 mm sizes
- Note: Large straining screen with lowest pressure drop
- Optional: Quick Opening Arrangement
- Optional: Differential Pressure Gauges